Z Plate Assembly
  • Z Plate Assembly

  • Spindle Assembly

  • V-Wheel Kit (4 Pcs)

  • Eccentric nut (2 Pcs)

  • M5 Washer (4 Pcs)

Add Comment

No. 10 Spanner
  • No. 10 Spanner

  • No. 8 Spanner

  • 3mm Allen Key

Add Comment

  • Insert the eccentric nuts in the holes indicated with the notch of the eccentric nut pointing to the left

  • Assemble the V-Wheels with the M5 Washers (2 Pcs) at the back of the plate

  • Tighten the V-Wheels with the No. 8 Spanner and the 3mm Allen Key

  • Make sure the V-Wheels can turn easily

Add Comment

  • Mount the two remaining V-Wheels in the holes as indicated with the M5 washers (2 Pcs) as the back of the plate and only hand tighten the screws

  • Insert the Spindle Assembly by pushing the two V-Wheels on the right to the right hand side

  • Once the Spindle Assembly is in place, tighten the two V-Wheels on the right with the 3mm Allen Key and the No. 8 spanner

  • Make sure the V-Wheels can turn easily

Add Comment

  • Use the No. 10 Spanner to adjust the preload between the V-Wheels by turning the eccentric nuts on the two left V-Wheels

  • Make sure the Z Axis can move up and down

Add Comment

Finish Line

5 other people completed this guide.

Paul Cronje

Member since: 09/03/2017

2,081 Reputation

28 Guides authored

0 Comments

Add Comment